- 追加された行はこの色です。
- 削除された行はこの色です。
* NFSクライアント [#keabffbe]
** 前提 [#v0d570a1]
- OSはLinux CentOS6.3とする。
- nfsは標準パッケージを利用する。
- NFSサーバ192.168.1.100は/var/export/share01ディレクトリを公開している事とする。
- NFSクライアントは/var/mnt/share01に上の公開ディレクトリをマウントする事とする。
** nfsパッケージのインストール [#sdc7528c]
yum install nfs-utils
yum install autofs
** マウントポイント作成 [#hc97534f]
mkdir -p /var/mnt/share01
** マウントする [#w015e4ec]
mount -t nfs 192.168.1.100:/var/export/share01 /var/mnt/share01
** 起動時に自動的にマウントする1 - /etc/fstab [#eb52ae26]
192.168.1.100:/var/export/share01 /var/mnt/share01 nfs defaults 0 0
fstabの記述の詳細については、man fstabを参照する。
- defaultsはrw, suid, dev, exec, auto, nouser, asyncと等価。自動起動を止めるにはnoautoを指定する。
- fstabの記述の詳細はman fstabを参照する。
The fifth field (fs_freq).
This field is used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth
field is not present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.
The sixth field (fs_passno).
This field is used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root
filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a
drive will be checked sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism
available in the hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the
filesystem does not need to be checked.
*** 参考 [#i392ead1]
- NFS クライアントの設定 https://access.redhat.com/site/documentation/ja-JP/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/s1-nfs-client-config.html
** 起動時に自動的にマウントする2 - autofs [#v515b37b]
*** /etc/auto.master [#y571fd48]
/var/mnt /etc/auto.var.mnt
- auto.masterファイルにマウントポイントの親になるディレクトリ(/var/mnt)を指定する。さらにそのマウントポイントの詳細を記述するファイル名(/etc/auto.var.mnt)を指定する。
*** /etc/auto.var.mnt [#l4a53768]
share01 -fstype=nfs 192.168.1.100:/var/export/share01
- 指定したauto.var.mntファイルにマウントポイントになるディレクトリ(share01)を指定し、マウント実行に必要な情報を指定する。
- これで、cd /var/mnt/share01 とすると、/var/mnt/share01がマウントされ、share01内のファイルを参照出来るようになる。
*** 参考 [#g904291e]
- autofs https://access.redhat.com/site/documentation/ja-JP/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/s1-nfs-client-config-autofs.html